The LED lamp, shuttle bus will be perfect for your crops.
Customer ratings and reviews
Available
Attention : last pieces available !
New
Founded in 1995 in Bretten (Germany), Prima Klima is a Czech manufacturer specialized in filtration, ventilation and air conditioning products ...
The lamp LED Shuttles has a light spectrum ideal for growing fruit from cuttings or seeds.
In order to provide optimal conditions, it is preferable to ventilate the cooling elements with a slight current of air, using for example, a fan. This will reduce elements of cooling up to 15°C.
The plants stop to grow when the temperatures are 30 to 32°C, it is recommended to stick to temperatures of around 17 to 23°C and avoid temperatures above 28°C.
On this model, the power can be adjusted from 10 to 100% using the potentiometer (regulator). The distance between the LED lamp having an operating power of 100%, with a minimum distance of 40 cm for the plant the most high in order to avoid a potential risk of radiation exposure is too high. However, if the lamp power is decreased to 30%, the distance can also be reduced.
It is imperative to protect the regulator from moisture, especially when cleaning your lamp, or your plants (a problem following this, is not supported by the warranty). By using it only in cases of real need.
IMPORTANT INFORMATION :
For the 3 year warranty works, it is essential to register your device or to stamp the warranty card by the retailer with the date of purchase and present it in the event of a claim.
Composition :
The components discussed come from well-known manufacturers such as Osram and Lumileds.
Benefits :
Model | LED Shuttles 6 Dimmable 240W |
Input voltage | 220-240V |
Energy consumption | 1.15 A |
Power | 240 W |
PPF | 552 µmol/sec |
Luminous efficiency | > 2.3 µmol/J |
Light Source | LUMILEDS + Osram |
Angle of light | 120° |
Index of protection : Dimmable Non-dimmable | IP40 IP65 |
Weight | 5.5 Kg |
Power factor | 0.95 |
Operating temperature | -20°C to +40°C |
Safety tips :
It is not necessary to use this lamp outside, and do not expose to moisture.
It is important to always disconnect the lamp to any cleaning or exchange of modules.
Protect your eyes using safety goggles adapted in its use.
The contacts in platinum of the lamp exposed, must be covered with stickers attached before the product can be reused.
The pilot power intelligent automatically adjusts the lamp power according to the number of built-in modules.
The lamp should not be used with contacts that are not protected due to the risk of electric shock.
Check and clean the modules every 3 months. Wipe the polycarbonate cover of the LED lamp with a cotton cloth or microfibre cloth and a mild cleaner (a wiper contact lenses). Never use detergents containing solvents !
Except in the case mentioned above, the lamp is maintenance-free.
Founded in 1995 in Bretten (Germany), Prima Klima is a Czech manufacturer specialized in filtration, ventilation and air conditioning products ...